|
|
|
|
Diamond details: |
|
| Diamond id: |
SP115159 |
|
| Carats: |
2.33 |
|
| Color: |
FY (Fancy Yellow)
|
|
| Clarity: |
SI1 |
|
| Shape: |
Oval |
|
| Cut: |
Not Available |
|
| Polish: |
Very Good |
|
| Symmetry: |
Good to Very Good |
|
| Depth %: |
0.00 |
|
| Table %: |
0.00 |
|
| Girdle: |
|
|
| Culet: |
|
|
| Fluorescence: |
|
|
| Measurement: |
10.57x7.22x3.83 |
|
| Certificate: |
IGC |
|
|
|
2.33-carats FY-color SI1-clarity Oval |
 |
Call 1-800-720-1105 for assistance.
|
EXPERT ASSISTANCE / NEED IT SOONER?
Note: Prices and availability are subject to change without notice. For more information, view our policies.
|
The way a diamond is cut, it's shape, as well as symmetry, and proportions, has a direct influence on the brilliance of a diamond.
The precision of the cut dictates the amount of light that the diamond will refract and reflect. The more expertly it has been cut, the greater its brilliance will be. When a diamond is cut to Ideal proportions, light is internally reflected from one facet to another and then dispersed through the crown, or top/table of the diamond. If the cut is too deep, then some refracted light will escape through the opposite side of the pavilion, or bottom of the diamond. If the cut is too shallow, then some light will escape through the pavilion before it can be reflected. A well-cut diamond is comprised of facets with the correct angles perfectly placed to maximize the diamond's brilliance. It is the quality of the cut and final polish that reveals the beauty of a diamond.
The majority of diamonds appear white in color, however, there are subtle differences, which Color Grading is intended to define. The Gemological Institute of America (GIA) Grading Laboratories use a color scale that ranges from D, E, F "colorless" to Z "strong yellow". The "colorless" diamond is more valuable than a diamond with a "hint of color to faintly yellow", although the grades between colorless and the "near colorless" G, H, I, and J can really only be truly appreciated by making a side by side comparison between diamonds of near equal size and shape.
Diamonds of color grade K and lower have enough yellow color to be visually apparent, yet can still be considered a choice by some as their cost is much less than higher color grade stones.
It may be beneficial to think of the diamond color grades as you might think of the endless variety of shades within a specific color of paint. Imagine you're painting a room and you've settled upon the color beige. You quickly discover that beige is available in a variety of tints and hues. Individually, from one shade or tint to another, the color difference is barely perceptible. It is when only in comparing shades that are several colors apart that the differences become obvious. So it can be with diamond color.
| Clarity:SI1 |
Clarity Grading is intended to describe, to what degree and under what conditions a diamond is free of naturally occurring inclusions or blemishes.
A diamond is carbon that crystallizes in the earth for millions of years. During the crystallization process a variety of inclusions in the crystalline structure may occur. These inclusions, described by terms such as: cloud, feather, dark inclusions, etc., are found in almost every diamond and are generally caused by conditions present when the diamond was formed, though blemishes may also occur during the polishing process. The grading for clarity measures how many or few of these flaws are found, and gives special consideration to where they are located in the diamond.
Since nature makes nothing absolutely pure or perfect, those diamonds with few inclusions are most rare and command a higher price. The industry wide scale ranges from the low end or imperfect I-3, to the best "gem quality", the internally flawless IF/FL.
|
|
|
|
